Earn

Under the Earn section you can deposit $YU into the Stability Pool to earn yields and Berries or provide liquidity in AMMs to earn fees and Berries.

Stability Pool

1. Go to the Stability Pool under the Earn section. If you have never staked $YU before or have withdrawn all your $YU, you will see an initial screen where you can stake $YU.

2. Enter the amount of $YU you want to deposit (up to 5 decimal places). The system will update your Pool Share and USD equivalent dynamically. Click “Submit”, confirm the transaction in your wallet, and wait for blockchain confirmation. Once completed, a success message will appear.

  1. Claim Rewards Over time, Liquidation Gains and Token Rewards will accumulate.

    • Liquidation Gains come from collateral distributed when positions are liquidated, proportional to your share in the pool.

    • Token Rewards are generated from stability fees. Currently, $YU rewards are distributed based on pool share and updated every 30 seconds.

    • You can view the current estimated APR on the Banner.

  2. When rewards are available, you can click “Claim” YBTC or “Claim” $YU, confirm the transaction in your wallet, and then receive the rewards directly in your wallet.

  1. Deposit More $YU If you want to increase your stake, click Deposit More, enter the amount, and submit the transaction. After confirmation, your new total stake will be updated.

  1. Withdraw $YU Click Withdraw, enter the amount (must not exceed your total staked $YU), and confirm the transaction. Once completed, your staked balance will be updated.

  1. View Transaction History Click “Stability Pool History” to see your past deposits and withdrawals, along with corresponding blockchain transaction details.

  2. Please note that the $YU in the Stability Pool is designed for liquidation mechanism, meaning that over time, your staked $YU may decrease as it is used to cover liquidated positions. However, in return, you will receive liquidation gains in YBTC, which may offset the reduction in your staked $YU.

Farming

  1. Choose a pair you want to provide liquidity for and click "Provide Liquidity."

  2. On the Uniswap page, click "Add Liquidity."

  1. Make sure you are using Uniswap V3 and the fee tier is set to 0.01%.

  1. Set a custom price range between 0.99 – 1.01 USDC per $YU, or 0.99 – 1.01 WBTC per YBTC (the range can vary slightly).

  1. Enter the amount of one asset you want to deposit—Uniswap will automatically calculate the required amount of the other asset.

  2. Approve the spending and confirm the transaction in your wallet.

  1. Once the transaction is confirmed, you will see a position in Uniswap if the liquidity was added successfully.

  1. Return to the Farming page and click "Stake NFT Tokens."

  2. Choose the position you want to stake and click "Stake." You can view your position's value and price range.

  1. Approve spending and confirm the transaction in your wallet.

  1. Note: If you want to adjust your position, you must first withdraw your liquidity from Uniswap and make the adjustments there. Only Uniswap V3 positions with a 0.01% fee tier and an active price range are eligible for Berries rewards! The current lockup period is 7 days. You can only withdraw your NFT after 7 days of staking it.

  2. LP fees are the trading fees you earn when you add your tokens to a liquidity pool. When others swap tokens using that pool, they pay a small fee — and you get a share of it based on how much you contributed. It's like earning passive income by helping others trade. For accurate details on LP fees, you’ll need to withdraw the NFT first and check the corresponding pair on Uniswap, or estimate fees based on the APR shown there. Withdrawing the NFT will stop Berries from accruing. LP fees are distributed through Uniswap when liquidity is removed.

DeFi Marketplace

In DeFi marketplace, you can interact with other DeFi protocols using YU or YBTC. Please note that some protocols are on Solana, so you’ll need to bridge YU to Solana in order to complete certain tasks.

Completing DeFi marketplace tasks earns you Berries with multipliers (4x, 6x or more) applied to the base rate of 0.05 Berries per $YU per hour, depending on the protocol and the task, as shown in the interface.

Note: Berries generated on Solana are automatically tracked and will be shown to users in future updates. Feel free to provide liquidity.

Pendle

  • Click “Go” under the Pendle row in the DeFi Marketplace.

  • If you want to become an LP, click the $YU pool and choose “Zap In.” You’ll need the underlying token ($YU) to proceed. As an LP, you’ll earn trading fees and may also receive PENDLE incentives. We recommend setting Keep YT Mode to enabled to avoid price impact when adding liquidity, while retaining YT for separate yield or points collection.

  • To buy YT (Yield Token), go to the $YU market with a future expiry date and navigate to the PT/YT page. Enter the amount you wish to purchase, click “Swap” to complete the transaction. YT represents the future yield of the underlying asset, and you will receive the full yield(Berries) at maturity based on the amount of YT you hold.

  • If you want to maximize your LP token yield, make sure your address holds vePENDLE. For more details, please refer to the official documentation: https://docs.pendle.finance/ProtocolMechanics/Mechanisms/Guides/ApplyBoost

  • Alternatively, you can enhance your yield by locking your LP position on platforms like Penpie or Equilibria. Note: Currently, Berries rewards do not apply to LPs deposited through these platforms.

  • For more operational details, please refer to the Pendle documentation: https://docs.pendle.finance/AppGuide/UsingPendle

Penpie & Equilibria

  • You can boost your returns and receive Berries via these two protocols.

  • You must first obtain LP-YU via Pendle; otherwise, Berries won't accumulate for Penpie/Equilibria.

  • Click “Go” under the Penpie/Equilibria row.

  • Enter the amount of YU LP to deposit.

  • Approve and confirm the transaction.

  • For more operational details, please refer to the following documents.

  • https://docs.equilibria.fi/ and https://docs.penpiexyz.io/

RateX

  • Click “Go” under the RateX row in the DeFi Marketplace.

  • If you want to become an LP, go to the Add Liquidity window, enter the amount, click Add Liquidity, and confirm the transaction in your wallet.

  • If you want to yield trade (buy YT using leverage), go to the Market page, find the $YU card, click Leverage on the detail page, enter your position amount under Your Farm, and confirm the spending.

  • If you want to earn (buy PT tokens), go to the Market page, find the $YU card, click Earn on the detail page, select a maturity date, enter the deposit amount, and confirm the transaction in your wallet.

  • For more details on how to operate, please refer to the docs https://docs.rate-x.io/ratex

Raydium

Here’s a guide on how to provide YU/USDC liquidity on Raydium:

  • Click “Go” under the Raydium row in the DeFi Marketplace.

  • Click “Connect Wallet” and connect your Solana wallet (e.g. Phantom).

  • Enter the amount of $YU and USDC you want to add. You need to provide both tokens in a 1:1 value ratio.

  • Confirm your vaule and approve the transaction in your wallet.

  • Once confirmed, you will receive LP tokens representing your share in the pool.

  • Over time, you will receive LP fees from your position, which can be tracked by checking your LP token value.

Kamino

How to add USDC–YU liquidity via Kamino on Raydium:

  • Click “Go” under the Kamino row in the DeFi Marketplace.

  • Connect your Solana wallet (e.g., Phantom or Solflare).

  • In the My Positions section, enter the amount of USDC and $YU you want to deposit.

  • Click “Deposit and Stake”, then approve the token transfers in your wallet.

  • After successful deposit, you can claim your rewards in the Farm Overview section.

PreviousBridge ToolNextBerries Rule - Yala's Reward System

Last updated

Was this helpful?